Filters PCB circuit schematic
diagram design engineering services,product design,PCB layout
design company low cost China
2Department of Electronic Engineering, I-Shou University, Kaohsiung
840, Taiwan
3Department of Mechanical and Mechatronic Engineering, National
Taiwan Ocean University, Keelung, Taiwan DESIGN CONCEPTS (04)
Digital Hardware, Design
Process, Design of Digital Hardware
TESTING OF LOGIC CIRCUITS
(08)
Fault Model, Path sensitizing,
Random testing, Circuits with Tree Structure.
BOOK:
1. Introduction to Logic
Design – MARCOVITZ – (Text )
Oxide layer growth on
Silicon wafer surface. Oxidation in the presence of dry oxygen
& wet oxygen. Oxide layer growth along various crystal
directions.
STANDARD BIPOLAR, NMOS
AND CMOS CIRCUITS (4)
Processing and fabrication
using circuit layout. Process evaluation.
THE SI-MOS CAPACITOR (2)
Its fabrication and characteristics.
SUB MICRON DEVICE PHYSICS AND TECHNOLOGY (8)
Review of basic device
physics, MOS capacitor and transistor theory, Moore’s law
on technology scaling, MOS device scaling theory, Short channel
effects, sub threshold leakage, Punch through, DIBL, High
field mobility, Velocity saturation and overshoot, ULSI technology,
Nano fabrication
Source signals, digital
modulation techniques-PSK,QPSK,M-array PSK& FSK.PLL, carrier
recovery with narrowband filter and AFC loop
MULTIPLE ACCESS (04)
System engineering considerations,
FDMA, TDMA, CDMA, comparison of multiple access techniques
4. G. Maral & M. Bousquet,
Satellite Communication Systems, John Wiley and Sons, Inc.,
1999.
5. B. Elbert, Introduction
to Satellite Communications, Artech House, 1999.
6. Pratt, Bostian, and
Allnutt, Satellite Communication Systems, 2nd Edition, John
Wiley & Sons, 2003.
Cardiovascular Measurement:
The heart out cardio vascular system, Electrocardiography,
Photocardiography, Ballistocardiography, Plethymography, Magneta
Cardiography, Pacemakers, Defibrillators and computer applications.
Respiratory system measurement: Respiratory mechanism, measurement
of gas volume, flow rate, measurement of gas concentration
in inhaled aided respiratory controller. Measurement of electrical
activities in muscles and brain: Electromyography, Electroencephalograph
and their interpretation.
MODERN IMAGING SYSTEM
(09)
Introduction to Ionising
and Nonionising radiation, principles of X-ray production
and interaction, special techniques, CAT, mammography, Ultrasound
Imaging Systems and its interaction, Magnetic Resonance Imaging
System, Basic NMR components different imaging methods, image
processing, filters, enhancements and restoration and image
segmentation.
BIOMEDICAL TELEMETRY AND
TELEMEDICINE (08)
Introduction to Biotelemetry,
Physiological parameters, Wireless telemetry, Single channel
telemetry systems, Multichannel wireless telemetry system,
Multipatient telemetry, Implantable telemetry systems, transmission
of analog physiological signals over telephone, Telemedicine,
Application of Telemetry in Patient care Rationale:
The student would be able to understand the basics of mobile
communication and realise the problems encountered in day
today life encouraging him to find solutions hencewith.
Small scale Multipath
Propagation, Parameters of mobile multipath channels, Types
of small scale fading, Rayleigh and Rician fading distribution,
Training a generic adaptive equalizer, Linear , Nonlinear
and algorithms for adaptive equalization, Diversity techniques,
RAKE Receiver. Interleaving, Block, Convolutional and turbo
codes
MULTIPLE ACCESS TECHNIQUES
(05)
FDMA, TDMA, SSMA, Spectral
efficiency of multiple access systems
WIRELESS NETWORKING (07)
Mobile IP, Mobility and
internet module, Assumptions and requirements, entities and
terminology, IP packet delivery, registration, Tunelling,
Optimisation, IPv6 protocol, Indirect TCP, Snooping TCP, Mobile
TCP, Transmission, Transaction oriented TCP
1. Mobile Communications,
Jochen Sciller
2. Wireless Digital Communications,
Dr. Kamilo Feher
3. Wireless Communications
and Networks, William Stallings
Course Name : DESIGNING
WITH POWER DEVICES ng
materials and wires, Design of inductors for power frequency,
Radio frequency & High frequency
SWITCH MODE POWER SUPPLIES
(14)
Basic regulators-Buck,Boost,
Buck Boost, Derived topologies-flyback, forward, Pushpull,
half & full bridge converter, Special converters Like
Cuk’ converter, PWM control techniques, Study of PWM control
Ics,Design of base derive circuits, Design of input section,
output section & control section, Thermal design concepts,
EMI/EMC considerations, Protection circuit design for power
supplies
UPS & OTHER POWER
SUPPLIES (08)
Concept of AC & DC
resonant power supplies, Concept of AC & DC Bi-Directional
power supplies, Concept of Unonterrupted power supplies, Solar
cells as power source devices & Their characteristics
BOOK:
1. George Chryssis, ‘High
frequency switching power supplies: theory & design” McGraw
Hill Book Co. 1984 (Text)
INTRODUCTION (03)
Design for Manufacturing,
Design for Prototyping
CAD FOR PRINTED CIRCUIT
BOARDS (09)
Layout rules & parameters,
Design considerations for digital PCBs, High Frequency PCBs,
Analog PCSs, Power Electronics PCBs, Microwave PCBs, Multilayer
PCBs Design Considerations, Detail of Manufacturing Practices.
Multilayer & Flexible
PCBs, Surface Mount Technology & Design Considerations,
Computer Aided Manufacturing, Computer Aided Engineering,
Rapid prototyping, Quality Control
BOOK :
1. W.Bosshart, Design
and Fabrication of PCB- (Text)
REFERENCES:
1. Nievel and Draper,
Product Design and Process Engineering
2. Raskhodoff, Electronics
Drafting and Design
3. E.R.Howells, Technology
of Chemical and Material for Electronics
VOICE, DATA & VIDEO
INTEGRATION: Active filter hardware design & performance
for the DIII-D plasma control system
Sellers, D.; Perron, J.R.; Walker, M.L.; Broesch, J.D.
Fusion Engineering, 2003. 20th IEEE/NPSS Symposium on
Volume , Issue , 14-17 Oct. 2003 Page(s): 405 - 408
Digital Object Identifier 10.1109/FUSION.2003.1426670
Summary: The digital plasma control system (PCS), currently
in operation on the DIII-D tokamak, requires inputs from a
large number of sensors. Due to the nature of the digitizers
and the relative noisy environment from which these signal
are derived, each of the 32 signals must be conditioned via
an active filter. Two different types of filters, Chebyshev
and Bessel with fixed frequencies: 100 Hz Bessel was used
for filtering the motional Stark effect diagnostic data. 800
Hz Bessel was designed to filter plasma control data and 1200
Hz Chebyshev is used with closed loop control of choppers.
The performance of the plasma control system is greatly influenced
by how well the actual filter responses match the software
model used in the control system algorithms. This paper addresses
the various issues facing the designer in matching the electrical
design with the theoretical.
In this letter, a minimized closed-loop dual-band filters
using trisection stepped-impedance resonators (SIR) structure
is presented. The closed-loop trisection SIR with dual-band
frequency response are designed, and to establish appropriate
couplings in the structure. Moreover, the proposed filter
also provides the size reduction of the maximum 98% against
the other dual-band filter. The total size of the filter is
less than 14 mm × 14 mm based on RO3003 substrate. In addition,
the proposed filter can be implemented by using a printed
circuit board (PCB) technology to achieve low-cost, easily
integrated design and fabrication. © 2006 Wiley Periodicals,
Inc. Microwave Opt Technol Lett 49: 219-221, 2007; Published
online in Wiley InterScience (www.interscience.wiley.com).
DOI 10.1002/mop.22062
|
PCBSINO
a leading Printed Circuit Board(PCB) Design Bureau,outsourcing
company,locate in Shenzhen, China. We offer custom specified
electronics design and product design / development services
through which you can have circuits and electronic products
designed as per custom specifications.We also help customer
to get the new products from the idea stage to mass production.
design
graphic: PADS,OrCAD,Protel,etc...
