HCL offers domain-specific hardware engineering and design services in VLSI ASIC, FPGA, and SoC engineering, board design, embedded software, mechanical engineering, and design, prototyping, and value-added engineering services such as compliance engineering, independent verification and validation and low volume manufacturing. We offer these services for partial lifecycle product engineering and for full lifecycle solutions.

HCL’s hardware design capabilities have been built and refined over the decades and enriched with specialist partnerships to provide spec to silicon engineering services to OEMs and component manufacturers in verticals like aerospace, automotive, hi-tech, medical electronics, consumer electronics, computer architecture, networking, and storage.1. China Supplier of Printed Circuit Board Assembly

Our products include digital products and their accessories ranging from digital camera to mp3 player, watch and computer peripherals and consumer electronics covering gifts and toys, household and office work, etc.With a strict and quality control system, we are dedicated to a very high level of business ethics in bringing quality products to the benefit of our customers.

Company: Shenzhen Shengercheng Technological Co., Ltd. [Province:Guangdong, China]
2. Professional Supplier of PCB Assembly

We specialize in Power, Communication equipment, remote control system, and consume electronic products. We have been recommending a hi-tech electronic products, and relying on our high quality.

Company: Yichtech Electronic Corporation Limited [Province:Guangdong, China]
3. PCB Assembly (005) [2009-02-20]

PCB Assembly (005) DIP board Minimum component: 0.4 Components: 90pcs Industrial equipment controller board

Company: Shenzhen Jingbang Technology Co., Ltd. [Province:Guangdong, China] Computer and Electronic Product Manufacturing
Nature of the Industry
Working Conditions
Employment
Occupations In The Industry
Training and Advancement
Outlook
Earnings
Sources of Additional Information
Significant Points

Employment is projected to decline 12 percent over the 2006-16 period due to productivity improvements, imports, and the movement of some jobs to lower wage countries.
The industry is characterized by significant research and development activity and rapid technological change.
Professional and related personnel account for 1 out of 3 workers.

Nature of the Industry [About this section] Back to Top

The computer and electronic product manufacturing industry produces computers, computer-related products, including printers, communications equipment, and home electronic equipment, as well as a wide range of goods used for both commercial and military purposes. In addition, many electronics products or components are incorporated into other industries’ products, such as cars, toys, and appliances.

Goods and services. This industry differs somewhat from other manufacturing industries in that production workers make up a relatively small proportion of the workforce. Technological innovation characterizes this industry more than most others and, in fact, drives much of the industry’s production. This unusually rapid pace of innovation and technological advancement requires a high proportion of engineers, engineering technicians, and other technical workers who carry out extensive research and development. Likewise, the importance of promoting and selling the products manufactured by the various segments of the industry requires knowledgeable marketing and sales workers. American companies in this industry manufacture and assemble many products abroad to take advantage of lower production costs and favorable regulatory environments.

Electronic products contain many intermediate components that are purchased from other manufacturers. Companies producing intermediate components and finished goods regularly choose to locate near each other, because doing so allows companies to receive new products more quickly and lower their inventory costs. It also facilitates joint research and development projects which benefit both companies. As a result of having the skilled workforce that fosters product improvement, several regions of the country have become centers of the electronics industry. The most prominent of these centers is Silicon Valley, a concentration of integrated circuit, software, and computer firms in California’s Santa Clara Valley, near San Jose. However, there are several other centers of the industry throughout the country.

Globalization has become a major factor in the electronics manufacturing industry, often making it difficult to distinguish between American and foreign companies. Many American companies are opening plants and development centers overseas and overseas companies are doing the same in the U.S. Many products are being designed in one country, manufactured in another, and assembled in a third. The U.S. electronics industry tends to be focused on high-end products, such as computers and microchips. Even so, many components of final products manufactured in the U.S. are produced elsewhere and shipped to an American plant for final assembly.
A model for the take-back of discarded consumer electronicsproducts
Cramer, J.M.; Stevels, A.L.N.
Engineering Science and Education Journal
Volume 5, Issue 4, Aug 1996 Page(s):165 - 169
Digital Object Identifier
Summary:The article discusses the problems in building up an end-of-life industry for consumer electronics products in an economically feasible way. A voluntary agreement (covenant) between government and industry is proposed to overcome these problems

IEEE Members

Log in by entering your IEEE Web Account Username and Password.

Although some of the companies in this industry are very large, most are relatively small. The history of innovation in the industry explains the startup of many small firms. Some companies are involved in design or research and development (R&D), whereas others may simply manufacture components, such as computer chips, under contract for others. Often, an engineer or a physicist will have an innovative idea and set up a new company to develop the associated product. Once developed, the company licenses a production company to produce the product, which is then sold by the original company. Although electronic products can be quite sophisticated, production methods are generally similar, making it possible to manufacture many electronic products or components with a relatively small investment. Furthermore, investors often are willing to put their money behind new companies in this industry because of the history of large paybacks from some successful companies.

4. PCB Assembly [2009-02-16]

PCB Assembly Specification: 1. Automatic SMT PCB assembly (PCBA) lines in purified workshop 2. Hole through PCB assembly (PCBA) lines 3. RoHS ...

Company: Yichtech Electronic Corporation Limited [Province:Guangdong, China]
5. Printed Circuit Board Assembly (PCB Assembly) [2009-02-18]

Features: PCB design &manufacture 1) Fabrication data inputs: Gerber data RS-274-X or RS-274-D with aperture list and drill files; Design file ...

Company: Leadsin Technology Co., Ltd. [Province:Guangdong, China]

The HCL Advantage:
Proven Expertise: We have more than thirty years of Engineering and R&D expertise and experience in developing critical hardware products.
Strategic Partner: With offices and development centers in more than 17 countries, HCL can be your Global Innovation and R&D Partner – with the hub in India.
Greater market penetration: We enable our customers to serve existing markets better as well as enter adjacent and new markets.
Next Gen Solutions: We offer complete portfolio of product engineering services ranging from concept, designing, prototyping, manufacture, testing, after market support, to re-engineering and developing Next-Gen solutions.
Quick Time-to-market: We follow domain-specific quality standards and processes and have reusable components to ensure quick time-to-market the product.