circuit layout,circuit PCB layout,electronic board layout services,shenzhen China

circuit build design and layout services

PCB layout for electronics circuit is project number 97947 posted at GetAFreelancer.com. Click here to post your own project.

Closed
(Selected Service Provider anumolu) Status: Closed
Budget: $100-300
Created: 10/15/2006 at 20:19 EDT
Bidding Ends: 10/20/2006 at 20:19 EDT
Project Creator: nayabk
Buyer Rating:
(2 reviews)
Description: Layout of approximately 35 parts PCB board in Orcad or any other Gerber compatible software. The entire layout consists of 5 surface mounted ICs, 1 OSC, 2 ethernet jacks, a 7805 regulator, an interface connector, and rest passive componets.

Our current design consists of 3 DIP ICs with 8 bit I/O port. The new design will expand this to 16 bit I/O.

The designer must be familiar with PCB design.
--------------------------------------------------------------------------------
Additional files submitted:
nodeLayoutLabeled.jpg

Job Type: Electronics
Engineering

Database: (None)
Operating system: (None)
Bid count: 13
Average bid: $ 171

Related project


CFD model Featured


posted by rr123
Budget: $30-250

EAGLE Circuit/PCB Layout Tips
These notes are mainly for myself, as reminders for how to do operations I just learned or tend to forget.

Supply
What’s up with GND and GNDA and AGND? How do I tie them together? I need to write a more complete answer about why EAGLE has different grounds and where to tie them together.

Meanwhile, the short answer is to insert the GND-GNDA component from the supply1 library, (apparently) tie GND-GNDA’s GND to GND and GNDA to AGND or whatever you’re using, and then follow these instructions on a SparkFun forum to activate layers 53 and 54 to make a jumper appear in a new later on your board connecting the two.

How do I connect power supply and ground pins on ICs? EAGLE is supposed to connect them automatically, but that seems to depend somewhat on using the right supply symbols. If you need to connect them manually, use INVOKE (the button with four AND gates and an arrow, just above the T for text button) and click on one of the gates. You get a popup window listing different gates and the power connections; pick the power and place it on your schematic.

General Editing
How do I copy a group of objects? For some reason, the Copy tool doesn’t work on a group, but the Cut tool copies the group to the clipboard to be pasted. (Grrr.)

Select the objects with the Group (dotted rectangle) tool, then pick Cut off the Edit menu and click on any highlighted object, then pick Paste off the Edit menu and you should have a floating collection that you can position and anchor (click).

Messages Posted: 2

If you are the project creator or one of the bidders for more options

Service Providers PMB Bid Delivery Within Time of Bid Provider Rating
hasanjava
$ 100 30 days 10-15-2006 20:41
(2 reviews)
Dear Buyer, please see PM. Thanks.
-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

Amrsfmtn
$ 250 7 days 10-15-2006 20:56
(2 reviews)
hi, I'm an electronics engineer. I have a large experience with orcad layout desin tool. please see your PMB for more info. Amrsfmtn
-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid
Streamlined PCB Layout Service | Schematic Capture Service | What's New |
| Online_Training | About Us | Free Gerber Viewer | | Glossary | Help |
| Electronics Project Design and Development Links | Contact Us | Site Map |

Welcome to Golden Gate Graphics, a Colorado PCB layout service bureau.

Our designers' motto for PCB layout and schematic capture is

If you are an electronics design engineer and have finished the schematic capture of your current project and need to get your design manufactured as printed circuit boards, your next step is production of CAM artwork that will be used in the processes of your board house . Golden Gate Graphics is your best choice for fast and accurate PCB layout or PCB design service. If you have drawings or sketches of your circuit and need your schematic capture done for you, well we do that too.

We design your electronic schematics and boards to be manufacturable, so your entire electronics project design costs less and gets built faster. Our methods work so well at getting things right that we are offering training in these procedures. Our PCB designers have done our training, and our training teaches how to streamline the PCB design process. The result: Your design gets done quickly and without errors. The product is not just "artwork" ; it's

medha99
$ 275 6 days 10-15-2006 22:55
(1 reviews)
Hello! The total project will be $275/- for this project only.
-- Perform action on this bid -- Posting contact details in bid Spam or advertising in bid Fake bid Obscenities in bid

tristan24
$ 100 4 days 10-16-2006 06:23
(1 reviews)
I may provide PCB layout with GERBER/EXCELLON files needed for PCB manufacturer assuming that You provide schematic(prefer gif/jpeg/bmp file format). I believe I can finish the task in 4 days, maybe more if it is very complicated design, but no more than 7, I think. I encourage You post PM for more details.