PCBSINO have many years expertise in BGA and leadless
device assembly. Our combined technical knowledge and
cutting edge tools help customers gain access to the higher
technology sector. We are able to supply a pain-free transition
to this sector, supporting products in both prototype
and development activities.
PCBSINO is equipped to undertake a wide scope of complex
technology work, and typically the products we manufacture
have multiple BGA devices and leadless devices.
Service features:
Experienced
& reliable company.
Multiple
BGA, CGA, QFP, LPBGA, LCC, TSOP, flip-chip (all current
technology).
ERSAscope
optical inspection.
X-ray
inspection.
Placements
from 1 off upwards.
Controlled
removal/rework if ever required.
Re-balling
of faulty or used devices.
Surface
Mount PCB Assembly
The Preferred Surface Mount Technology (SMT)
board is one which has Surface Mount Technology (SMT)
components on one side only. If all of the components
are not available in Surface Mount Technology (SMT)
form, Thru-hoe components on the same side as Surface
Mount Technology (SMT) components is an acceptable solution.
SMT Plant List:
SMT Line 1
DEK 265 Infinity Screen Printer.
Nutek PCB loaders and un loaders
SMT 1.7 Forced Air Convection Reflow Oven
SMT Line 2
DEK 265 GSX Screen Printer
Philips GEM Emerald Placement Machine 0402-54mm2
ABW 1008 Forced Air Convection Reflow Oven
SMT Line 3
DEK 248 Screen Printer with DEK Align
Philips GEM Emerald Placement Machine 0402-54mm2
SMT 1.7 Forced Air Convection Reflow Oven
Lead
Free PCB Assembly
Inspection
There are a number of visual differences between
leaded and un-leaded solder joints. IPC A 610 has been
up issued to account for this.
One benefit we have found is that because the
solder joint tends to be less shiny the capability of
our AOI systems to successfully inspect solder joints
is greatly improved.
Prototype
PCB Assembly
Offering assistance and advice in best manufacturing
procedures.
Establishing a unique process for a new product.
Achieving cost reduction from an established product.
BGA
Assembly
X-RAY
This 2 Axis bench top model provides an X-Ray inspection
facility to supplement the ERSA cope providing a comprehensive
BGA Inspection capability.
Conventional
PCB Assembly
70% reduction in Customer held stock/inventory.
99.6% on time delivery agains a varying demand pattern.
0.3% reject level.
Complete
Product Assembly
PCBSINO also offer facilities for "Complete"
product assembly, a value adding service that is taken
advantage of by an increasing number of our customers.
Where production is ongoing we have set up flow lines
dedicated to the assembly, testing and packaging of
customers products. This gives the benefit that products
can be processed quickly even in high volumes with in
process inspection of each assembly operation integrated
as part of the line.
Inspection
Automatic Optical Inspection
BGA Inspection
BGAs are inspected both visually using an "Ersa
Scope" and using an X–Ray system.
Our
advantage: Sr. Engineer will go through the whole process:
Design - component procure - PCB Fabrication - Assembly,
we can make High Quality Data work, High Quality component,High
Quality PCB, High Quality Assembly, and with these effort
will come out High grade and reliable product.
