PCB fabrication Shenzhen CN China,electronic Circuit board fabrication,PCB prototyping,Low cost bulk fabrication
PCB needs is our goal. Your board can using PCB123 to produce a design that seamlessly fits into the PCB123 ordering and manufacturing process. If you need a specific EDA tool, our Design Center is equipped with Mentor Expedition, Mentor PADS and Cadence Allegro, running on state-of-the-art workstations in a secure, fully backed-up network environment.

Stilwell Baker is not your typical service bureau.

Embedded Passives An Overview Drivers, Materials and ...
Manufacturing A solid understanding of the PCB manufacturing process ... IPC has established standard fabrication allowance for designers thru IPC ...

Gould Electronics Inc. - LD (Specialty Application Foils)
Improves outerlayer to innerlayer registration. ... Reduces Fabrication Steps a??° Laminates made with LD foil come ready for laser processing directly out of ...

Training
bullet, On-line interactive curriculum that covers entire PWB Fabrication process, ... Etch, Strip; Outerlayer; Overview Courses; Desmear/Electroless Copper ...

Layout 1
challenges to both chemical and fabrication companies. ... and Laminar E-9112 dry film photoresist; for outerlayer, Laminar E-7600 dry film ...

SAMPLE IMAGES FROM IPC-CD-B1 The following document contains ...
Double-Sided PWB Fabrication Process (2 of 9). Electroless copper deposition. [IMG003] ... Laminated Board - Ready for outerlayer processing. [IMG090] ...

9-29 IMP
As the use of LDI for outerlayer etch. resist pattern generation has. increased, so has the need for a sol-. dermask process that fits with this ...

CONCURRENT ENGINEERING: Research and Applications
the overall fabrication process. Quality and testing. issues are recognized as significant ... soldermask, and outerlayer processing as well as the test ...

Thermal Reliability of High Density Interconnects Utilizing Microvias
facilitates fabrication steps. They are also the most cost-effective materials, ... in the outerlayer process. Laser drill speeds (noted in Figure 1) is the ...

Northrop Grumman Printed Circuit Boards
Each link below provides details about the key steps in the fabrication of printed circuit boards at NGPCB. Click Here for a complete listing of our Process ...

Atotech Global - Electronics - PWB and IC Substrate - Horizontal ...
Considering all the variables in the fabrication process (yield, uptime, chemical consumption, equipment maintenance, etc.) Atotech Horizon Systems are the ...

Non-Conductive Epoxy Filled Vias in PCB Provides New Product ...
Process. The process is rendered by drilling, copper plating, and filling the vias using standard PCB fabrication equipment. Once. the non-conductive filled ...

Multilayer circuit board manufacturing process - Patent 6804881
The use of glass reinforced inner and outerlayer materials creates additional ... view of the surface of the MLB at this stage in the fabrication process. ... Detailed Product Description

We can offer PCB & PCBA fabrication according to your requirement, with competitive price comparing superior quality standard. Both turnkey and consignee are acceptable for our company.
If you have any requirement, please send it to us via email, then we will reply you asap in details.
Type: S/S, D/S, Multilayers(<=6)
Substrate: FR4, XPC, FR1, FR3, CEM1, Aluminum base;
Min. Line Width/Line Distance: 6mil
Min. Aperture: 0.2mm
Surface Treatment: HASL, ENIG, Cupper, Silver PCB finishing, OSP, etc..
Features: General PCB assembly, through hole and SMT(s/c), standard and RoHS assembly, OEM
File format: Gerber Reliable China PCBA Manufacturer Provides Top-level PCB and FPC Fabrication
Product Details
Product Categories

All categories - 72 products
Contract manufacturing services - 16 products
Digital photo frames - 3 products
Electronic products OEM & ODM services - 17 products
PCB assemblies - 29 products
Portable GPS - 7 products

More information

Articles
? Automatic vehicle locators adopt GPS, GSM, GPRS
? PCB assembly suited to industrial, automotive and PC apps
? Technology advancements in the works

Contact Details

Topscom Precision Industry Co Limited
PCBA I Factory: No 3, Tannan
Road, Tanjia Industrial Village,
Gongming Street, Guangming
Shenzhen
Guangdong
China 518030

Chat with supplier using:

Homepage Address

Key Contact:
Dr Wu, Frank
Director of PCBA I Factory
Administration

2nd Factory Address
II Factory Location
Tongfuyu Industrial Park
Longhua Town
Shenzhen
Guangdong
China (mainland) PCB Fabrication
Circuit Board Fabrication Services, PCB Multilayer Fabrication, PWB Fabrication Services, PCB Manufacturer

Showing 1-12 of 12 = product catalog / search specs

Company Results

Accurate Engineering - Multilayer PWB Printed Circuits, Metal Core Boards, Aluminum, Copper, Flex, Private Ownership Sun Valley, CA USA 818.768.3919

Alphanetics - PCB Fabrication, Solder, Wire Bondable Immersion Gold, Hard Gold PCB, Immersion Tin, Private Ownership Santa Ana, CA USA 714.647.9750

Basic Electronics - Flex Circuits, Printed Circuit Boards, Bus Bars, Heat Sinks, Membrane Switch , Private Ownership Garden Grove, CA USA 714.530.2400

Dynamic Details Inc (DDI) - PCB Printed Circuit Board Fabrication, Multi-Layer PCB Boards, Stock Symbol DDIC Anaheim, CA USA 714.688.7200
DDI Dynamic Details Inc $185 Million annual sales, electronics PCB board fabricator

EECO Switch - Silicone Rubber Keypads, DIP Switches, Miniature Thumbwheel Switch, PCB's, Private Ownership Brea, CA USA 714.835.6000

Fineline Circuits Technology - Printed Circuit Boards, 24 Layer, FR4 Laminate, Getek, Isola, Nelco, Private Ownership Brea, CA USA 714.529.2942

Intricate Technology - PCB Fabrication, Design, PBC Assembly Plating Services, Drilling, Lamination, Private Ownership Anaheim, CA USA 714 533 8300
Printed Circuit Board Design, PCB Fabrication, PCB Assembly Services

Multilayer Prototypes Inc (MPI) - Quick Turn Printed Circuit Board PCB Fabrcation Manufacturer, Private Ownership Newbury Park, CA USA 805.498.9390

Murrietta Circuits - Electronic Manufacturing Services, Printed Circuit Board Assembly, Fabrication, Private Ownership Anaheim, CA USA 714.970.2430
- gedruckteschaltungen..
- platinen.org
- leiterplatten-direkt.eu
- leiterplatten-xchange.org
Fabricators
- leiterplatten-online..
- direkt-pcb..
- pcb-prototype.eu
- precoplat.net
Maker
- precoplat.org
- precoplat.eu
- leiterplattenhersteller.org
- pcb-xchange..
Produce
- leiterplattentechnologie..
- leiterplatten-pool..
- gedruckte-schaltungen..
- leiterplatten-xchange..
Express
- leiterplatten-xchange.net
- leiterplatten-online.eu
- ptx-ic.net
- ptx-ic.org
Express
- ptx-ic.eu
- precoplat..
- microcirtec..
- ptx-ic..... cannot be completely dissolved. Multi-soldering is possible, as well as pressing techniques, thanks to the thinness of the layer. The thin tin layer does, | PWB FABRICATION | however, has its disadvantages. The inter-metallic copper-tin phase is approx. 0,25-m?ě thick when delivered. During storage, the diffusion of copper in the tin surface continues, | PWB FABRICATION | causing the thickness of the pure copper or tin layers to decrease. If the blended metal reaches the surface it becomes coated with a non-removable | PWB FABRICATION | oxide, making soldering impossible. Storage possibilities of immersion tin PCBs are, for this reason, considerably limited compared with conventional SnPb techniques: stored PCBs should be | PWB FABRICATION | used up within 3 months and if time exceeds 6 months, heavy processing problems can occur. The melting temperatures are markedly higher compared with SnPb, | PWB FABRICATION | therefore the assembling process for many components takes place at the absolute limits of acceptance. As a result, component losses must be expected when assembled. ...
[ Pwb Fabrication ]

... by tolerance on other dimensions, in notes, or by feature control symbols. | BLIND VIA | A plated through hole, connecting inner layers of | PWB FABRICATION | multilayer board, that penetrates to one Outer-Layer. | BLISTER | A localized swelling and separation between any of the layers of a laminated base material, | PWB FABRICATION | or between base material and conductive foil. It is a form of delamination. | BOND STRENGTH | A measure of force or pressure required to | PWB FABRICATION | separate a layer of material from its base. This may be measured as peel strength, in pounds per inch of width, or as pull strength, | PWB FABRICATION | in pounds per square inch (when a perpendicular pull is applied to the surface of the material). Frequently used to refer to wire bonds. | | PWB FABRICATION | BREAKAWAY PANELS | Hardboards held together in a grouping with breakaway tabs. The panels make handling easier for automatic insertion and wave soldering. The boards | PWB FABRICATION | can be separated by snapping apart. | BREAKDOWN VOLTAGE | The voltage at which an insulator or dielectric ...
[ Pwb Fabrication ]

... | DIFFERENT PCBS | of the same materials and surface structure, but of varying amounts are combined to make up one production lot. Preparation | PWB FABRICATION | costs incurred during the manufacturing process can aided manufacturing software. Laser-printed transparencies are typically employed for phototools; however, direct laser imaging techniques are being employed to replace phototools for high-resolution requirements.
PCB milling uses a two or three-axis mechanical milling system to mill away the copper foil from the substrate. A PCB milling machine (referred to as a 'PCB Prototyper') circuit board fabrication,electronics PCB PWB PCBA prototype and mass fabrication,Low cost Shenzhen,CN China
REDUCE TIME TO MARKET We have a dedicated supplier base of ISO accredited companies, let us use our experience to match the build specification to the most appropriate supplier.
Potentials

PCB Fabrication
Drill Capacity

Layers

Track spacing

PCB Capacities

RoHS compliant bare boards

Minimum hole sizes 0.1mm We Design and Fabricate PCBA For High Mix, Low Volume requirements
Outerlayer Process Fabrication
PCB
PCBA
PCB Assembly
PCB Design
PCB Fabrication
PCB Layout
PCB Manufacturer
PCB Product
PCB Prototype
PCB Software
Printed Circuit Board
Protel PCB
Rigid PCB
Schematic
Single-Sided PCB
SMT Assembly
Solder
Solder Mark
Surface Mount Technology
Tin Stripping
2-Layer Board
Adhesive
Adhesive Tape
Electronic PCB
Flexible PCB
Innerlayer Process Fabrication
Laser Layer PCB Routing

ADD CATEGORY

Outerlayer Process Fabrication

Favourite Marketplace

Thermount Applications Guidelines Table of Contents
not be added to mechanically drilled holes, otherwise the outerlayer registration will be compromised ( ... K. SUMMARY OF MICRO-VIA HOLE FABRICATION PROCESS ...

Welcome to KCE HQ Home
Outerlayer Line & Space, 0.125/0.125, 0.075/0.10, 0.075/0.075 ... Advanced Process Capability requires additional process steps and/or special materials ...

operates in a similar way to a plotter, receiving commands from the host software that control the position of the milling head in the x, y, and (if relevant) z axis. Data to drive the Prototyper is extracted from files generated in PCB design software and stored in HPGL or Gerber file format.
"Additive" processes also exist. The most common is the "semi-additive" process. In this version, the unpatterned board has a thin layer of copper already on it. A reverse mask is then applied. (Unlike a subtractive process mask, this mask exposes those parts of the substrate that will eventually become the traces.) Additional copper is then plated onto the board in the unmasked areas; copper may be plated to any desired weight. Tin-lead or other surface platings are then applied. The mask is stripped away and a brief etching step removes the now-exposed original copper laminate from the board, isolating the individual traces.

The additive process is commonly used for multi-layer boards as it facilitates the plating-through of the holes (to produce conductive vias) in the circuit board.

[edit] Lamination
Some PCBs have trace layers inside the PCB and are called multi-layer PCBs. These are formed by bonding together separately etched thin boards.

[edit] Drilling
Holes, or vias, through a PCB are typically drilled with tiny drill bits made of solid tungsten carbide. The drilling is performed by automated drilling machines with placement controlled by a drill tape or drill file. These computer-generated files are also called numerically controlled drill (NCD) files or "Excellon files". The drill file describes the location and size of each drilled hole.

When very small vias are required, drilling with mechanical bits is costly because of high rates of wear and breakage. In this case, the vias may be evaporated by lasers. Laser-drilled vias typically have an inferior surface finish inside the hole. These holes are called micro vias.

It is also possible with controlled-depth drilling, laser drilling, or by pre-drilling the individual sheets of the PCB before lamination, to produce holes that connect only some of the copper layers, rather than passing through the entire board. These holes are called blind vias when they connect an internal copper layer to an outer layer, or buried vias when they connect two or more internal copper layers and no outer layers.

The walls of the holes, for boards with 2 or more layers, are plated with copper to form plated-through holes that electrically connect the conducting layers of the PCB. For multilayer boards, those with 4 layers or more, drilling typically produces a smear comprised of the bonding agent in the laminate system. Before the holes can be plated through, this smear must be removed by a chemical de-smear process, or by plasma-etch.

[edit] Exposed conductor plating and coating
The places to which components will be mounted are typically plated, because bare copper oxidizes quickly, and therefore is not readily solderable. Traditionally, any exposed copper was plated with solder by hot air solder levelling (HASL). This solder was a tin-lead alloy, however new solder compounds are now used to achieve compliance with the RoHS directive in the EU, which restricts the use of lead. Other platings used are OSP (organic surface protectant), immersion silver (IAg), immersion tin, electroless nickel with immersion gold coating (ENIG), and direct gold. Edge connectors, placed along one edge of some boards, are often gold plated.

Electrochemical migration (ECM) is the growth of conductive metal filaments on or in a printed circuit board (PCB) under the influence of a DC voltage bias.[1][2]

[edit] Solder resistcomponents. In-circuit test systems may also be used to program nonvolatile memory components on the board.

In boundary scan testing, test circuits integrated into various ICs on the board form temporary connections between the PCB traces to test that the ICs are mounted correctly. Boundary scan testing requires that all the ICs to be tested use a standard test configuration procedure, the most common one being the Joint Test Action Group (JTAG) standard.

When boards fail the test, technicians may desolder and replace failed components (professionel term: rework).

[edit] Protection and packaging
PCBs intended for extreme environments often have a conformal coat, which is applied by dipping or spraying after the components have been soldered. The coat prevents corrosion and leakage currents or shorting due to condensation. The earliest conformal coats were wax. Modern conformal coats are usually dips of dilute solutions of silicone rubber, polyurethane, acrylic, or epoxy. Some are engineering plastics sputtered onto the PCB in a vacuum chamber.

Many assembled PCBs are static sensitive, and therefore must be placed in antistatic bags during transport. When handling these boards, the user must be earthed; failure to do this might transmit an accumulated static charge through the board, damaging or destroying it. Even bare boards are sometimes static sensitive. Traces have gotten so fine that it's quite possible to blow an etch off the board (or change its characteristics) with a static charge. This is especially true on non-traditional PCBs such as MCMs and microwave PCBs.

[edit] Safety certification (US)
Safety Standard UL 796 covers component safety requirements for printed wiring boards for use as components in devices or appliances. Testing analyzes characteristics such as flammability, maximum operating temperature, electrical tracking, heat deflection, and direct support of live electrical parts.

The boards may use organic or inorganic base materials in a single or multilayer, rigid or flexible form. Circuitry construction may include etched, die stamped, precut, flush press, additive, and plated conductor techniques. Printed-component parts may be used.

The suitability of the pattern parameters, temperature and maximum solder limits shall be determined in accordance with the applicable end-product construction and requirements.Navigation
Main page
Contents
Featured content
Current events
Random article
Search
Interaction
About Wikipedia
Community portal
Recent changes
Contact Wikipedia
Donate to Wikipedia
Help
Toolbox
What links here
Related changes
Upload file
Special pages
Printable version
Permanent link
Cite this page
Languages
Bosanski
§?§ě§Y§?§?§a§?§ü§ú
?esky
Dansk
Deutsch
Eesti
Espa?ol
Fran?ais
???
Hrvatski
Bahasa Indonesia
¨?slenska
Italiano
?????
Lietuvi?
Magyar
Nederlands
?????Z
?Norsk (bokm?l)?
Polski
Portugu¨?s
Roman?
§?§?§?§?§ü§ú§?
Simple English
Sloven?ina
§?§a§á§?§ü§ú / Srpski
Suomi

We offer PCB Design, Fabrication and assembly Service at a very very competitive prices. We provide high quality service to small, medium and large electronic and computer companies all over the world.
A cost effective service for product development efforts is being supported by details of our Design and Manual Routing Service. A rare aptitude and ability to educate coupled with a desire to upgrade.
Service, Quality, CAD Compatibility, Experience and a Short turn around time will be the essence of our participation with your Product Development Team. We Support and Partner with Clients to work as your Design Team and provide them with a Dependable PCB Design Source.

A total solution of Printed Circuit Board

Printed Circuit Board Design & Layout Services
Printed Circuit Board (PCB) Assembly Services

? Analog or Digital to IPC-D275
? Commercial or Military
? Schematic Capture Netlist, Part List
? PCB Design Layout
? Multiple Width Route Codes
? EMC & Thermal Analysis
? Signal Integrity Management
? Gerber RS274X Output
? Documentation Creation (Bills of Material and CAM Outputs DXF or Gerber Data ) ? Engineering Prototypes

? Small, Medium, to Large Production Quantities

? Quick Turn & Standard Deliveries Available

State of the Art Eletronic CAD TOOLS

CIRCUIT CREATOR EZ- Board PROTEL
Board CREATOR EZ- Logic CIRCUIT MAKER
Logic CREATOR ORCAD Accel EDA
EZ- ROUTE TANGO EAGLE

State of the Art Mechanical CAD TOOLS

AutoCAD Pro/E Mechanicals 2000

COMPLETE REVERSE ENGINEERING SOLUTIONS

NO CAD DATA? NO GERBER DATA?
NO TEST FILES? NO PLOTTER? NO COMPONENTS?
NO SUPPORT? NO DOCUMENTATION?
NO PROBLEM!

REVERSE ENGINEERING

Multi-layer board Reverse Engineering
with Complete Documentation
(BENEFITS)

INCREASE SALES
REPAIR \ SERVICE SPARES
REDUCE CAM & PLOTTING TIME
RECOVER TOOLING FOR PCB
MFG,ASSEMBLY, & TEST
USE OUR MANPOWER TO CUT EXPENSES
AND REDUCE YOUR LIABILITIES

DESIGN / LAYOUT

PCB & Mechanical Design ¨C
Military & Commercial Per IPC Specs

SCANNING
PCB Board & Artwork Scanning

PLOTTING

Photo Plotting/ Image setting /Film
Output 1/8 mil Resolution
Image Complex Files on 26" x 36"
up to 200 Megs using .007 mil thick
film @ .001 accuracy
DATA TRANSLATION & CONVERSION

CAD to CAD or Gerber to CAD:
PADS, PCAD, ORCAD, DWG, Corel, Adobe, etc
LET US PROVIDE THE MISSING PIECES TO YOUR PUZZLE.
OUR CONSULTANTS ARE READY TO PROVIDE SOLUTIONS
TO YOUR UNIQUE REQUIREMENTS.
"When I provide Gerber files that have been re-checked?by your FreeDFM service, I know my clients will not have unwelcome delays getting their boards produced."?a href="index.php?load=content&page_id=29#1"><read more>
R.P., Capital Products Design.

View Testimonials$500 Off New Customer SpecialGet an INSTANT Quote Now!FREE Pre-Order File CheckSpecial OffersPlace an Order Now!FREE Dinner CertificatesCapabilitiesContact Us

CURRENT SPECIALS
1.Get Your PCBs twice as fast at no additional cost...142 and 244 are back!
2.Up to $300 OFF on Protos
3.Free Tooling on New Part #'s
4.$600 Off 1st Flex Order
5.SMT Stencils...as low as $99!

REGISTER NOW !!!
TO RECEIVE SPECIAL DISCOUNTS,
QUOTES AND FREE GIFTS!

Experience Convenience, Reliability & Speed
What Makes Us Different?

No order is too small.?Even 1 board is ok.
Industry's Best ON-TIME Shipping. Customers depend on Advanced Circuits for on-time?and early shipments.
Expedites ven SAME DAY & WEEKEND TURNS
No Tooling charges on Protos (Standard Spec)?shipped ON TIME or FREE! (see details)
24/7 tech support Monday-Friday (Saturday until 2:00 PM MT)
All order files receive detailed CAM file review
No early daily cutoff time
"Live" salespeople for personalized contact
INSTANT online Quotes, Orders & Status
Products and Services
?Prototype PCBs

Full Spec (SAME DAY to 5 days)
$33 Each (2 layer - 5 days)
$66 Each (4 layer - 5 days)
Bare Bones (Basic specs) Ships in 1 day!
?Production PCBs

SAME DAY to 4 weeks
Weekend Wonders Order Friday, receive Monday
Flex & Rigid-Flex Circuits
SMTSolder Paste Stencils

Get a FREE File Check Now!
Have You Tried FreeDFM..?

An Advanced Circuits Exclusive!

More than a Design Rules Check, FreeDFM.. checks PCB design files for issues that affect manufacturability and sends you a detailed FREE graphical report WITHIN MINUTES. You'll also get an instant quote! (Web-based, no software download required.)

Click Here to View Full
DFM Report

Identifies problems with:
* Trace Width
* Annular Ring

* Inner Clearance

* Missing Files

Contact a Sales Rep in your Area by Clicking HereInternational Customers Click Here
Printed Circuit Board (PCB) Press Releases06-30-08 : Advanced Circuits Invests $1 million in New Equipment to offer Best-in-Class Circuit Board Production
Advanced Circuits Invests $1 Million in New Equipment to Offer Best-in-Class Circuit Board Production ...
03-05-08 : Advanced Circuits Named One of Colorado?s Fastest Growing Technology Companies in Deloitte Colorado Technology Fast 50 Program for Ninth Consecutive Year
AURORA, Colo. ?March 5th, 2008 ?Advanced Circuits, the country's leading source for quickturn printed...
09-12-07 : Advanced Circuits Introduces Free PCB Layout Software
Aurora Co, (Tuesday August 28th) - Advanced Circuits Introduces Free PCB Layout Software......
11-15-06 : ADVANCED CIRCUITS WORKS OVERTIME FOR CUSTOMER EXCELLENCE This home page offers advice and insights on the process for producing a Printed Circuit Board. The production process has been broken down into the different areas, to prevent confusion and allow easy access to the information within these areas.

You will notice that not all of the areas have articles attached to them at this time. This home page is still "under construction", and we will be adding other articles as they become available.

We invite experts from all areas of the process to submit articles to be included on this home page. The goal is to make this home page a technical reference and resource for the Printed Circuit Board fabricators, and any additions, suggestions, or cooperation with other suppliers to our industry are welcomed.

How does my company become part of the Information Center?
We welcome your feedback. Please feel free to contact RD Chemical with your comments about the PCB Fab Web site, by clicking here. Thanks for your input.
You may also be interested in the following related Web sites:
Institute for Interconnecting and Packaging Electronic Circuits -- home page for the IPC, a trade association representing over 2000 companies in the electronic interconnection industry. We have collected a variety of industry-related sites that are informative, interesting, and useful for our customers. Please choose from the selections below for links to those areas:

PCB Design Services
SMT Prototype Services
Electronic Links
PC Board Repair Services
Freeware
Recommended Industry Software
Online Publications
Other References

PCB Design Services:

Stilwell Baker Design Center ¨C Flexible solutions to your PCB design needs.
From a simple prototype evaluation board to a multi-gigabit application to high volume consumer electronics applications; providing solutions to your
web site: www.China-PCB.org......stilwellbaker..

ArtnetPro, Inc.
ArtnetPro, Inc. has been a leader for over a decade in providing specialized scanning services for the PCB Industry, PCB Design, Photo Plotting, Graphic Design, Pre-Press Services, and much more! ArtnetPro, Inc.