QTRONICS DESIGN LIMITED

HOME | BIOLOGY | FILMS | GEOGRAPHY | HISTORY | INDEX | MUSIC | SOLAR BOATS | SPORT | SPONSORS

One of our development partners on the Solar Navigator World Challenge is the up and coming Qtronics Design company. We needed a PCB and program designed to monitor the ships charging and energy storage. We also needed an automatic control system to align our solar wings toward the sun in good weather conditions.

Their knowledge of electronics and firmware design gives them the ability to provide designs that a suited to both prototype builds and mass production quantities.

If you have a design requirement for either firmware, electronics or just a PCB layout then contact Qtronics today for a informal talk about your requirements, after which we can provide a quotation for the design.

PCB LAYOUT SERVICE (design)

Qtronics apart from designing electronics and firmware can also provide custom PCB layouts to your requirements. We are able to work from a circuit drawing scribbled on a sheet of paper to professional circuits drawn in packages such as Altium, Proteus, PADS, Easy-PC to mention but a few.

We provide our customer with a complete set of Gerber files that enables you to go to any PCB manufacture in the world to get your PCB’s Produced. A list of recommended suppliers can be found at the bottom of this page.

Gerber files from Qtronics are output in Gerber274X format, all dimensions are in mm and relevant construction details will be provided within the Gerber files. NC drill data is also supplied.
Printed Circuit Board (PCB) Assemblies in Minnesota
Welcome to the premier industrial resource for Printed Circuit Board (PCB) Assemblies. We supply a broad range of printed circuit board (PCB) assemblies including custom printed circuit board (PCB) assemblies and automotive printed circuit board (PCB) assemblies. Use this comprehensive vertical directory to find medical, military and OEM printed circuit board (PCB) assemblies.
Learn more about Printed Circuit Board Assemblies (PCB) | Discuss Printed Circuit Board Assemblies (PCB) & Other Topics
Narrow Your Search
Search Within Results:

Companies Serving
Minnesota

Search Within # Miles
Show companies within
miles of:

Company Type
Manufacturers
Custom Manufacturers
Service Companies

Certifications
AS9100
FDA Registered
ISO 13485
ISO 13485:2003
ISO 9000
ISO 9001
ISO 9001:2000
ISO 9002
Any Certification
Printed Circuit Board (PCB) Connectors
Printed Circuit Board (PCB) Tapes
Printed Circuit Board (PCB) Terminals
Printed Circuit Board (PCB) Relays
Printed Circuit Board (PCB) Switches
Printed Circuit Board (PCB) Wiring
Printed Circuit Board (PCB) Conveyors
Printed Circuit Board (PCB) Carriers
Printed Circuit Board (PCB) Brushes

More...

ThomasNet User Experience Survey

Provide Feedback Assemblies: Printed Circuit Board (PCB) Results (1 to 19 out of 19) E-mail multiple companies Save results to MyThomas
E-mail to Colleague Printer friendly version

Serving: Minnesota
to Serving Minnesota Located in Minnesota

Tricor Systems, Inc. - Elgin, IL (Serving Minnesota)
Manufacturer, Custom Manufacturer, Service Company
http://www.tricor-systems.com
ISO 9001:2000 certified manufacturer of assemblies including printed circuit board assemblies. Products include test equipment, light measurement & inspection systems & complete subsystems including avionics equipment, test sets & related devices, indicators & control sets. Capabilities include the...

Proto Service, Inc. - Eden Prairie, MN
Manufacturer, Service Company
Manufacturer of RoHS compliant printed circuit board (PCB) assemblies from prototype to finished product. Capabilities include assembly of boards with over 30,000 contact points, 30 layer PC boards up to 1 in. thick & over 25 in. long & component addition to microprocessors. Pre-production, rework,...
All Flex, Inc. - Northfield, MN
Manufacturer
http://www.allflexinc.com/DesignGuide/double.shtml
ISO 9001:2000 certified manufacturer of polyimide & polyester flexible printed circuit boards including double-sided printed circuits. Double-sided printed circuits consist of two copper conductor layers, & component assembly on both sides. Industries served are medical, instrumentation, industrial...

AbelConn - New Hope, MN
Manufacturer
http://www.abelconn.com/Products/tabid/58/Default.aspx
ISO 9000:2000 & AS 9100 certified custom manufacturer of printed circuit board (PCB) assemblies including backplanes. Types of backplanes include double sided, multilayer, pressfit, reflowed, surface mounted, conformal coated, wire wrapped & compact peripheral component interconnect backplanes....

Asia Sourcing Corp. - Minneapolis, MN
Manufacturer, Service Company
http://www.asiasourcing.com/forgings.htm
ISO 9001 ISO/QS 9000 certified manufacturer of fabricated assemblies, hand assemblies, metal assemblies, printed circuit board (PCB) assemblies & prototype assemblies. Products include shaft & gear assemblies, bracket assemblies, solenoids, valves, cable assemblies, wire harnesses & OEM custom...
Aerospace Systems, Div. of Nortech Systems, Inc. - Fairmont, MN
Manufacturer, Custom Manufacturer, Service Company
http://www.nortechsys.com/CoreCompetencies/PrintedCircuit.aspx
ISO 9001:2000 & AS 9100 certified manufacturer of printed circuit board (PCB) assemblies. Capabilities include fully automated SMT & PTH, semi automated through hole & special lines, conformal coating, encapsulating, ICT & ESS testing, electromechanical high level box build & system integration.... Dyna-Graphics Corp. - Chaska, MN
Manufacturer, Custom Manufacturer
http://www.dyna-graphics.com
ISO 9001:2000 manufacturer & designer of membrane switches & touch control technology keypads. US or Asia sourced. Environmentally sealed switches, embedded LED's, PCB assemblies, flex circuits, graphic panels overlays, rubber keypads. Engineering services & innovative tooling options.
Tri-C Design, Inc. - Northfield, MN
Service Company
Flexible Circuit Design House Specializing In The Design & Panelization Of Flex Circuits. Single Sided Through Multilayer Flex. PTH With SMT. Reverse Engineering & Flexizing Of Hardboards. Electronic Links To Local Manufacturers
BTW, Inc. - Coon Rapids, MN
Manufacturer
Surface Mount, Thru-Hole, BGA
Winland Electronics, Inc. - Mankato, MN
Manufacturer, Service Company
Contract manufacturing of electronic assemblies, printed circuit board assemblies, through hole, SMT, BGA, ISO 9001.
Electramatic Inc. - Mpls, MN
Manufacturer
Cable Assemblies, Electrical Wiring Harnesses; Mechanical Assemblies
Pemstar - Rochester, MN
Manufacturer, Service Company
Manufacturer Of Electromechanical Assemblies; Engineering & Fulfillment Service
Hei, Inc. - Victoria, MN
Manufacturer, Service Company
Ultraminiature Microelectronic Devices
LCL Electronics Inc - Baxter, MN
Manufacturer
Electronic Contract Manufacturing
Ei Microcircuits, Inc. - Mankato, MN
Manufacturer, Service Company
Manufacturer of assembly systems; Electronic design service
Altron, Inc. - Anoka, MN
Manufacturer, Service Company
Full-Service Electronics Manufacturing, Including Surface-Mount Assembly, Through-Hole Assembly
Precision Electric Corp. Div., Versa Companies - Plymouth, MN
Manufacturer
Wiring Harnesses, Printed Circuit & Electro-Mechanical Assemblies
Production Technologies, Inc. - Minneapolis, MN
Manufacturer
Turnkey & Consignment PCB Assembly. Through-Hole To Complex 12 Mil SMT. MYDATA P & P (2) With FP Vision & Electrical Verification. Vitronics Nitrogen Reflow. Amistar Dip/Radial With Hollis GBSII Wave. ISO 9002 Registered
Wintech Manufacturing Co. - Winona, MN
Manufacturer

CADSTAR PARTNER
Layers is distributor van CADSTAR voor de Benelux regio.
Indien u een performant en betrouwbaar PCB design tool zoekt, contacteer ons voor een demo of offerte.

? Cadstarworld
? Cadstar Training
? Cadstar Support
? Download Cadstar Express

Layers/Dekimo is a design house for Printed Circuit Boards design,
electronic engineering, and software applications.
With a development staff of more than 100 professionals,
we can be your long-term engineering partner and help
you to achieve your business goals more efficiently.
We are located in Leuven and in Ghent to be as
close as possible to our customers.

GO Global … …intelligence
Layers/Dekimo have an experience of 20 years and have expertise in many areas as Automotive, Electronic Industry, Telecom, Communication, Power Electronics, Space and Avionics, Semiconductor Industry, Pharma, Medical, Internet Applications, …
Solutions >>
We develop high-level application software for PC-platforms, embedded software for real time tasks, micro-controllers and PICs, FPGA applications in VHDL, electronic design, advanced PCB routing (in house or on site) and prototyping.
Layers joins Dekimo...
July 08 >>
We are very proud to announce that starting from July 1, 2008 Layers joins the Dekimo group. Dekimo, located in Ghent, is Belgium’s largest independant design house for electronic engineering and software applications, with a development staff of 80 professionals …

Recruitement
Layers/Dekimo is urgently looking for:
Board Designers (BE) >>
Board Designers (NL) >>
Embedded Softw. Engineers, Ghent >>
Embedded Softw.Engineers, Leuven >>
Hardware Engineers, Ghent >>
Hardware Engineers, Leuven >>
Softw. Engineer Microsoft, Ghent >>
Softw. Engineer Microsoft, Leuven >>

--------------------------------------------------------------------------------

US SITE · AUS SITE
Company
Company Detail
Enquiry Form
Sitemap

Design Services
Our Design method
Spec'ing your job
Hardware design
Firmware design
Examples: Circuits
Examples: Photos


Can't find it? Try:
Circuits
Serial to Parallel
Overview
Specification Intro.
Writing your Spec.
Tech Ingredients
Example Specs
Designer selection
R&D Economics
Inspiration

Pictures (=1000 words)
A PCB Factory
Example projects
...more ...more
A real design Lab

Reference, etc
RS232 pinouts
RS485 Autotrax P89LPC932 Past products
Further info
Link library (15k+)
Google search
Google groups

--------------------------------------------------------------------------------

CONTACT or ENQUIRY

--------------------------------------------------------------------------------

?2008 AirBorn Selecting your Electronics Design House
Electronics design is relatively one of the less expensive parts of custom design & engineering work. The cost of basic design work for an electronics prototype can sometimes be less than enclosure design and tooling costs, if the unit has a plastic injection moulded case. Having said this, all the good electronics design staff cost real money - the client is paying for the expertise and experience that the designer has to offer.

It is quite possible to contract and employ an Electronic Designer without being especially knowledgeable in electronics. Insist on understanding the principles involved, even if not the precise details of operation. Experience demonstrates that there are two breeds of design engineers - the desirable type are fountains of information, the undesirable types hide information to make themselves indispensable. If you employ a "Closed-Book" engineer, you will find it difficult to ever un-employ him. While there are occasionally valid reasons, practices which highlight an undesirable engineer or design house are:

Circuit diagrams unavailable
Source code unavailable or poorly commented
Numbers rubbed off of integrated circuits
Parts lists unavailable, or without parts costs
Factory test and calibration not described (if complicated)
Secret principles - "Security through Obscurity"
The last item deserves a short comment. In the field of Cryptology, "Security through Obscurity" is widely questioned as a principle. Most such systems have proven to be poorly designed. Perhaps the best model is the 20 Year old Data Encryption Standard (DES). Complete details of DES operation have been available since its release - for 20 years it was algorithmically secure. As of 17 July 1998 brute force attacks have been developed that can crack a ciphertext-plaintext pair in about 56 hours - but that is not actually a failure of the algorithm, DES has stood the test of time brilliantly. For security choose algorithm or patent - not obscurity.

Electronic Design houses can be found in the Yellow Pages under Electronic Engineers, on the internet [You've found one], through some specialist directories & magazines, and by asking around others who use electronics people.

In Selecting your design house, use these criteria:
ABILITY - Check the designers ability to produce and deliver by examples of his work. Don't be fooled by proficiency with tools or someone who just knows all the buzzwords - actual experience counts.

TIMESCALE - Turnaround time for recent projects. Simple microprocessor circuitry should take 8-12 weeks spec to prototype - longer if a significant amount of firmware is required. To get faster delivery usually results in exponentially rising costs, - or cut corners.

BUDGET - Your design house may be reluctant to estimate costs on your project before having all the details, but they will often be more forthcoming with the amount charged for another, similar sized job completed recently. For most work we quote, and considering the history that engineering work has of running over time and budget, that provides you, the client, with a lot of security.

COMMUNICATION - Effective communication is absolutely essential to your project being successful. Find a design house that speaks your language. Spend the time to work over your specification with them. If you have a clear spec and like what you are reading, then why not use an Australian Electronics Designer? We will make the effort to keep in touch by phone, we can ship prototypes anywhere in the world in 48 hours, and we spell out everything you could possibly want to know about us in black and white light blue, right here on this website.

DEPENDABILITY - Will the company or individual be around to provide you with engineering support in 5 years time? It costs quite a bit to get new engineers up to speed on a previous project - it is worth investing your work with a reliable vendor. (Actually, its quite funny - on several projects we have outlasted all the client in-house engineers - they have all moved on to other careers, and the sub-contractors are the only members of the original design team still available to the management!)

SPECIALTY - Industry Specialization (e.g. go to an eft-pos machine designer to get an eft-pos PCB designed) is useful, but can pose problems - the specialist design house probably works for your competition, also. A good design house works across a large range of industries and projects.
Of much greater importance is whether the design house is capable of producing the project technology you are after. Look for design houses with experience producing products with a similar level of technology - e.g. SMT, PC based, realtime acquisition, battery powered, or whatever else may be appropriate for your task.

Hardware design - 1997

Normally you would start with a list of subcontractors, rank them according to your criteria, and then contact each about your project. This may involve email, but would usually involve a phone call as well. Keep the information provided brief, but not deceptive. Avoid sending a subcontractor a 100 page document and asking for his feedback - you may be astounded by the silence! From the responses, and based on your ranking, you should pick a short list. Each of these you would email or call again, with a little more information, and ask for an estimate.Electronic
Senior Design Engineer - John Jolley
Software Engineer - Andrew Hill
MHA Integrated Electronic Services Ltd is a leading electronics design house and manufacturing services company, offering Full Product Design, Development and Manufacturing Services. Markets include; Automotive, Security, Consumer, Construction, Defence and Industrial Control.

Based in the North West, the company has been supplying products to a global customer base for over 10 years, and has extensive knowledge and expertise in this area.

The companies customer base can vary from individual inventors and start-up companies, who may initially approach the company with 'an idea', to sizeable blue-chip companies who are more likely to provide MHA with a definitive requirements specification.

In addition to laying out PCBs for products MHA design in house, offering PCB design services independently to customers seeking this service.

Products and Services
Assembly Services - Sub-contract
Assembly Services - Through Hole
Bluetooth - Design
Consultants - Microprocessor Systems
Consultants - PCB Design
Consultants - Wireless Design
Consultants - Wireless Solutions
Control Systems - Electronic
Corrosion Monitoring Systems
Data Acquisition Boards
Data Analysis and Processing
Data Capture - Systems, Equipment
Data Communications Equipment
Data Communications Systems - Design Services
Design - Analogue Electronics
Electronic - Power Supplies
Electronic Assembly
Electronic Assembly - BGA
Electronic Assembly - Equipment
Electronic Assembly - Prototyping
Electronic Assembly - SMD
Electronic Assembly - Subcontract
Electronic Assembly - Through Hole
Electronic Assembly SMD Offshore
Electronic Contract Manufacturing Services
Electronic Contract Manufacturing Services - Prototype
Electronic Contract Services
Electronic Contract Specialists
Electronic Control Services
Electronic Control System Design
Electronic Controls
Electronic DC Loads
Electronic Design Circuit Capture
Electronic Design Engineering
Electronic Design Services
Electronic Engineering Services
Electronic Engineering Software
Electronic Engineers
Electronic Equipment
Electronic Equipment - Custom Made
Electronic Manufacturing Services
Electronic Manufacturing Services - Interim Management
Electronic Product Design
Electronic Tagging
Electronic Temperature Controls
Electronic Unit Assembly
Electronic Unit Assembly and Test
Electronics Design Services
Embedded Solutions
Embedded System Design
Embedded System Programming
Return to MHA Integrated Electronic Services Ltd detailsVisit Our WebsiteEmbedded Systems
Embedded Systems Development
Embedded Systems Engineer
Embedded Systems Engineering
Embedded Systems Programming
Embedded Systems Software
Embedded Systems Solutions
Equipment - Test and Measurement
GPRS - Design Services
GPS - Design Services
GSM - Design Services
Manufacturing Assembly
Manufacturing Equipment - Design, Build
Manufacturing Services - Contract Electronic Assembly and Test
Microcontrollers
Microcontrollers - PCB Design
Mobile Data Communications
Modems - Embedded
PCB - Assemblies
Software - Real Time
Software - Serial Port Interface
Software - TCP/IP
Speed Control Systems
Subcontract - PCB
Subcontract PCB Assembly
www.China-low-cost-PCB.org///www.China-low-cost-PCB.org....design house.bluewatersys.com
DMV Designs Pty Ltd
(08) 6262 5481
DMV Designs Pty Ltd offer services for the design and manufacture of mechanical electronic equipment using a fully integrated design tool set.DMV Desi…

Mechanical Design

Fairclough Corporation Pty Ltd
(08) 9300 9697
Fairclough Corporation is an Electronic RD facility specialising in instrumentation for the transport, medical and general systems industries.We are c…

Pcb Design - Circuit Prototyping & Simulation Industrial Control Panel Installation
Office Screens
Thin Wall Tubing
PVC Foam
Cabling Patch Leads
HGV Recruitment
Protective Packaging
Pump Filters/Strainers
Portable Measuring Machines
LCD
Startrite
Height Safety Fall Protection
Ring Binders
Custom Laser Marking Solutions
Flight Cases
Document Scanning Services
Surface Preparation Equipment
3D Printing
Clear Plastic Packaging
Express Courier
Oil and Gas Recruitment
35 45 Series Valves
Aesthetic Glass Design
CNC Tooling
Safety Glass
DLC Internal Pipe Coatings
Packaging Labels
USB Flash Drives
Epoxy Resin Floor Coatings
Shot Blasting Equipment
Gas Fires
Bottle Coolers
Polythene Tubing
Rubber Moulding
Powder Handling
Office Ergonomics
Bespoke Transformers
International Freight Forwarder
Corgi Heating Service and Repair Engineers
Deep Hole Boring
Cladding
Laboratory and Cleanroom Design
Rubber Product
Electroless Nickel Plating
CNC Parts
Bird Scarer
Jewellery Display Cases
Electric Sliding Gates
Brush Plating
Air Cushion Machines

BrainSystems
(08) 6424 8550
BrainSystems offers innovative customized electronic and software engineering services. Our main area of expertise are embedded Digital Signal Process…

Embedded - Product Development

Clear Concept Designs
04 18878047
www.China-low-cost-PCB.org///www.China-low-cost-PCB.org....design house.clear-concept.com: CCD is a design company for modern living, incorporating sales of unique items and materials used in many of our design project…

Custom Design Electronic Design Engineer - Digital, Analogue, Firmware
<span id="rptSearchResults__ctl11_lnkCompanyName" class="inclLnkMedNrm">IC 3e</span>
Aug 16
Salary: ￡Neg

Based in the North this new position Electronic Design role has become available as part of a ... Key skills should include: Component level electronic circuit design , embedded systems Design and low noise electronics to control RF and ... Based in the North this new position Electronic Design role has become available as part of a ...

Save Job

--------------------------------------------------------------------------------
RF Engineer - 12 month fixed
<span id="rptSearchResults__ctl3_lnkCompanyName" class="inclLnkMedNrm">TPSL</span>
Aug 15
Salary: 12 Fixed term employment salaried + benefits

... proficient in the discipline of RF circuit, Antenna design and test within the division developing RF subsystems ... Subsystems. Excellent knowledge of RF transceiver architecture and design, preferably with experience relating to broadband wireless/cellular systems ... Antenna systems and hands on experience of antenna design. Excellent knowledge of digital TV/STB modulation standards such ...

Save Job

--------------------------------------------------------------------------------

Save Job View on the Map

--------------------------------------------------------------------------------
Test Developer
unknown
Nottingham, Nottinghamshire - Aug 15
Salary: ￡30k p hour

... developer you will have; "TWO years within the PCB manufacturing industry "Automatic optical inspection experience "Circuit test ... been achieved the successful candidate will begin to design their own processes. As well as the fantastic salary, a great pension scheme is on offer along with on site parking and other benefits. ...

Save Job View on the Map

--------------------------------------------------------------------------------
Principle Electronics Design Engineer
unknown
Camberley, Surrey - Aug 15
Salary: ￡35k - ￡40k pa + benefits

... Next Vacancy Return to search results Principle Electronics Design Engineer PRINCIPAL ELECTRONICS DESIGN ENGINEER Essential Requirements ! An Electronics Design Engineer having broad experience with specific expertise in analogue & digital circuit design preferably in an instrumentation development environment. ! To ... the product development cycle from requirement analysis through design & development into production. ! The work will ...

Save Job View on the Map

--------------------------------------------------------------------------------
Electronics Technician
unknown
Berkshire wide, Berkshire - Aug 15
Salary: ￡25K plus benefits

... will be to support engineers in the System Design Centre (SDC) in the design, build and verification of electronic design projects. The following will be primary tasks:- 1) Assembly of components onto prototype PCB designs (including surface mount) 2) Test of electronic ... diagnosis and rework of failed boards 4) Simple PCB layout design using schematic drawings provided by design ...

Save Job View on the Map

--------------------------------------------------------------------------------
Graduate Electronics Design Engineer
unknown
Camberley, Surrey - Aug 15
Salary: ￡20k - ￡24k pa + benefits

... Next Vacancy Return to search results Graduate Electronics Design Engineer GRADUATE ELECTRONICS DESIGN ENGINEER Essential Requirement ! An engineer having experience and understanding of analogue & digital circuit design for an instrumentation development environment. ! To work ... of a team contributing to all aspects of design & development across our wide product range. ! ...

Save Job View on the Map

--------------------------------------------------------------------------------
Digital Design Engineer - Essex
<span id="rptSearchResults__ctl6_lnkCompanyName" class="inclLnkMedNrm">Gold Group Ltd.</span>
Aug 14
Salary: 31000-36000 Per Annum Pension, Parking, Private Healthcare etc

Job Title: Digital Design Engineer required for position in north Essex - ... engineer with DSP, FPGA, full product life cycle, PCB design, external support etc. Digital Design Engineer MAIN PURPOSE: To design and develop new digital products using a mixture ... or as part of a small team to design the necessary hardware to meet the product specification ...

Save Job

--------------------------------------------------------------------------------
Digitial Design Engineer - Aerospace, Defence, Space - Bristol
<span id="rptSearchResults__ctl6_lnkCompanyName" class="inclLnkMedNrm">Gregory Martin International<
Aug 14
Salary: ￡40K-￡45K

Digital Design Engineer – Aerospace, Defence, Space . The Digital Design Engineer will be attached to the Aerospace division. The role will include digital design, including general purpose logic, microprocessors, microcontrollers and associated memory arrays skills.Worst case timing analysis, design to minimum complexity, mass volume and power, PCB layout and procurement. Circuit integration and test, including ...

Save Job

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
Electronics Design Engineer - Digital, FPGA, PCB
unknown
Portsmouth, Hampshire - Aug 14
Salary: ￡25000-38000

... | Next Vacancy Return to search results Electronics Design Engineer - Digital, FPGA, PCB Electronics Design Engineer Hampshire ￡25-38k This is a new requirement ... electronics company. The company is involved with the design, development and manufacture of complex precision electromechanical automated ... (nine engineers) and are a mix of FPGA design engineers, board designers, and good all round electronic ...

Save Job View on the Map

--------------------------------------------------------------------------------
Senior Electronic Development Engineer/ Team Leader
unknown
Aug 14
Salary: ￡40k - ￡50k pa

... Senior Electronic Development Engineer / Team Leader Electronic design engineer Salary up to ￡50000 The main role of this position is to provide electronic design, simulation and test development services to the business ... will include co-development activity with customers and also design and development for our own products. The skills ... include principally analogue and RF & Microwave circuit design. Additionally some software writing for test systems is ...

Save Job

--------------------------------------------------------------------------------
Principle Electronics Design Engineer
unknown
Surrey wide, Surrey - Aug 14
Salary: 45K

... Next Vacancy Return to search results Principle Electronics Design Engineer Our client is looking for a principle ... experience in the following - Analogue & Digital design skills, Microprocessor based circuit design, NPI, technical assistance on EMC & electrical safety ... of PAL/FPGA Technologies, CAD tools - Scematic capture, PCB Layout, Circuit Simulation. Real Time Recruitment Solutions operates ...Printed Circuit Board (PCB) Silk Screen Printing

Sponsored Links
Printed Circuit Board Fab

Company details

TEL: (01933) 315005 FAX: (01933) 318789
http://www.China-low-cost-PCB.org///www.China-low-cost-PCB.org....design house.cirgraphics.com
Update this company

Company location:

News and Blogs Total : 2 View more ?
3,500th shipment of printing system from Speedline - News Search on EMSNow
As the fastest stencil printer in the electronics assembly and semiconductor manufacturing industry, the AP Exel has also been improved with Auer Boat print processing.

http://www.China-low-cost-PCB.org///www.China-low-cost-PCB.org....design house.emsnow.com/newsarchives/archivedetails.cfm?ID=6490
Buying local, selling global - Eureka reference article
UK engineering is changing, with some specialist OEMs competing well against tiger economies’ while many high volume manufacturers struggle. But if OEMs are to succeed in the long term, they need first class local support from suppliers.

http://www.China-low-cost-PCB.org///www.China-low-cost-PCB.org....design house.eurekamagazine.co.uk/article/3361/Buying-local-selling-global.aspx
Web Sites Total : 20 View more ?
AUREL - Micro drills
Article: Unloaders for PCB - Work cells. More information on Loaders for PCB, Work sels Automation systems cannot be Processing machines, Automation cistems and find details of Electronic production, Laser marking, Electronic perdudion search.

http://www.China-low-cost-PCB.org///www.China-low-cost-PCB.org....design house.aurel.it/Micro-drills.html
SMTech Printer Spares and Service-SigmaPrint Mission
The Company will provide the best quality products and the highest level of service to the industry as an innovative and responsible service provider and design house for the range of SMTech PCB Screen Printing machines.