Overview
Getting ready
Formatting
Drilling
Hole wall activation
Board cleaning
Through-hole Plating
Photoresist lamination
Image inner layer
Etch inner layer
Laminate multilayer board
Select the substrates for the various layers based on the impedance and signal isolation requirements of your design and the physical limits placed on the total thickness of the laminated panel.
For a four layer design with a finished thickness of 0.063" (1.6mm), copperclad with 0.0007" (17) copper foil on both sides (so called half ounce/half ounce or "half over half" copperclad) and a substrate thickness of 0.025" (.64mm) is a good selection for the innermost PCB (designated .5/.5 0.025" FR4).
The outer layers will be constructed from copperclad with half ounce foil on one side and a substrate thickness of 0.017" (0.43mm). The substrates used in these outer layers are generally comprised of laminae of glass fabric held together with a partially cured resin that will remelt during multilayer lamination. Remelting causes the resin to become VERY tacky and adhere to the inner layers. This is the bonding mechanism that lies at the heart of multilayer fabrication. Copperclad based on these partially cured resins is referred to as "B stage" laminate. B stage is also now available with a polyester release liner lightly adhered to the resin side to protect the bonding surface during all pre-lamination processing.
The thickness of substrates used in PCBs with a higher layer count should be scaled accordingly (if the finished thickness is constrained to some preset value). One of the real advantages of the following technique is that, assuming that you can drill all of the layers simultaneously, in a single stack, you can pretty much stack as many layers as you want.
Set aside all of the drill bits that you will need, with spares if possible. This is especially helpful if you will be manually drilling the board. Hand drilling is hard enough without having to interrupt the work flow to go look for a drill bit. There is a fairly substantial body of scientific evidence that states that many of the most notorious mass murderers in history started out as mild mannered PCB drillers.
You will need at least 2 ea. 0.125"(or 3mm) dowell pins. If these are unavailable, broken 0.125" (3mm) shank carbide PCB drills will serve admirably. Make sure that you grind down any sharp edges to avoid cutting yourself and your counter tops during drilling. Electronics & Electrical ? PCB & PCBA ? Multilayer PCB
Sub-categories of Multilayer PCB

Selling LeadsSelling Leads RSS ProductsCompanies
Select All | Clear All Product Photo Description Region
Sell Ml-22 Multilayer board Jun 2, 2008
1) Part name: ML-22 2) Material: FR4, 1.6mm 3) Specification: 6-layer, H/1OZ, HAL (Sn/Pb), 100% Electrical Test , Routing, 4)...
Fully Hong Electronics Co., Ltd.

China [CN] Sell 3oz 6-layer Pcb Apr 15, 2008
DETAILS: 3oz 6-layer pcb:Layers:6 layers(3oz for each layer);Min line width/space:0.25mm;Min hole:0.40mm;Thickness:2.0mm;Immersion gold+W/F+CNC+V-CUT
Shenzhen Unice Circuit Co., Ltd

China [CN] Sell PCB Product Jun 5, 2008
manufacturing double and up to 32 multilayer board, HDI, High frequency, thick copper clad, rigid and flexible PCB and all kinds of high density PCB/PCBA
Shanghai WeiYan Industry Co., Ltd

China [CN] Sell Printed Circuit Board Jul 18, 2008
Lian Da Jin Electronic Ltd. is a Printing Circuit Board manufactory locate in shenzhen,China We had acquired ISO9001-2000 certificate and formed a complete set of quality management...
Lian Da Jin Electronic Ltd.

China [CN] Sell Computer Board Jul 17, 2008
Our business includes OEM (involving OEM and processing with supplied materials), ODM( R&D, design, material purchase), SMT(lead/lead-free), insertion manufacture (lead/lead-free)....
Shenzhen Kingtop Technology Co,.Ltd

China [CN] Sell Printed Circuit Board(pcb) Jul 17, 2008
Detailed Product Description: Product Name: Printed Circuit board (PCB) Quality standard: IPC-A-600 class 2 / 3 Number of Layers: double layers; 4 layers-12 layers Copper Thickness: 0.25-3.0oz,...
Us (HK) Industrial Co., Ltd.

China [CN] Sell Pcb Assembling Jul 16, 2008
Ningbo Apex Electronics Co.,Ltd. is a manufacturer for the professional electronical accessories such as PCBA, Mini circuit breaker, power strip, surge protector, wall switch,etc. In our company,...
Ningbo Apex Electronics Co.,Ltd

China [CN] Sell Pcb Jul 16, 2008
Established in 1997. Jetfly (HK) Electronic Ltd. Co, enjoys a long-time favor in the industry as a professional manufacturer of multi-layer (1 layers to 16 layers) printed circuit board, With...
Jetfly Electronics(HK)LTD

China [CN] Sell Multilayer Pcb Jul 16, 2008
Base material: FR4, FR1, FR2, CEM-1, CEM-3 Board thickness: 0.30 to 3.20mm (12 to 26mil) Copper thickness: 0.50 to 5 ounce Solder mask: LPI solder mask, conventional solder mask, peelable solder...
ET Ltd

China [CN] Sell Printed Circuit Board Pcb Jul 15, 2008
Board Thickness: 0.4-6.0 mm Treatment : Lead Free HASL, ENIG, Immersion Tin, Immersion Silver, OSP etc. Treatment Solder Mask : Green, Red, White, Yellow, Black, Blue. * We can provide quickturn...
Suntech Corporation Limited

China [CN] Pcba Jul 14, 2008
Base material: FR4, FR1, FR2, CEM-1, CEM-3 Board thickness: 0.30 to 3.20mm (12 to 26mil) Copper thickness: 0.50 to 5 ounce Solder mask: LPI solder mask, conventional solder mask, peelable solder...
ET LIMITED

China [CN] Sell Sell Circuit Boards Jul 11, 2008
Board layers: 4 Board material :FR4 Board thickness: 1.6mm Surface finishing: Plating gold Solermask: blue Legend ink: white
China [CN] Sell Multilayer Pcb Apr 8, 2008
Zoomtak Electronics is a big electronics manufacturer for printed circuit boards for years. Our Circuit boards include rigid circuit boards2~24Layer (Rigid PCB).All boards are electrically tested...
Zoomtak Electronics Co., Ltd

China [CN] Sell 10 Layers With Blind And Mar 31, 2008
Bomin Group is a professional high-tech PCB manufactory. It is formed by three filiales: ShenZhen Bomin Electronic Co., Ltd, MeiZhou Bomin Electronic Co., Ltd, and TaiZhou Botai Electronic Co.,...
Bomin Electronic Co., Ltd

China [CN] Sell Duoyuan Telecom Mar 25, 2008
l Housing: Nylon or PBT (UL94V-0) l Color: black or other colors are...
Duoyuan Telecome (HK) Technology Limited

China [CN] Sell Sheet Metal Stamping And Plastic Injection Mar 13, 2008
PCB design, layout, fabrication, assembly and function test 0402 placement IC precision: 0.4mm Experienced components sourcing team, specially for scarce parts Power boards with lead free...
Shenzhen Consons Electronic Technology Limited
Popular Keyword: Battery ceramic clothes PC camera PERFUME Atomizer silicon mobile case Sprayer textiles Trigger Sprayer



Click on the [Product],Sourcing Request and Suppliers News buttons to view more results on Multilayer PCB suppliers, Multilayer PCB manufacturers, Multilayer PCB exporters, Multilayer PCB [sourcing requests], as well the latest news on Multilayer PCB from suppliers, manufacturers and exporters.

Product


Supplier(8)


Sourcing Requests


Supplier News




Keyword: multilayer pcb
8 multilayer pcb Manufacturers and Suppliers Found
View Your Inquiry Basket (0) Clear All | Select All

Multilayer pcb Manufacturer & Supplier
Inquire Now
Company Name: US .HK. Industrial Co., Ltd. - China(CN) -(Updated: Jul 15, 2008)
Manufacture of
single-sided pcb boards double-sided pcb boards multilayer pcb boards fpc single-sided pcb board double-sided pcb board multilayer pcb board

Multilayer pcb Manufacturer & Supplier
Inquire Now
Company Name: Chantail Electronics Co., LTD - China(CN) -(Updated: May 04, 2008)
Manufacture of
single side pcb;double side pcb;multilayer pcb

Multilayer pcb Manufacturer & Supplier
Inquire Now
Company Name: Truly industial Ltd. - China(CN) -(Updated: Mar 20, 2008)
Manufacture of
2 side and multilayer pcb ; hdi pcb; single, enchase empty board; double and multilayer fpc (max. 8 layers). ,10 layers above pcb, cob.

Multilayer pcb Manufacturer & Supplier
Inquire Now
Company Name: Kingtechpcb - China(CN) -(Updated: Jul 16, 2008)
Manufacture of
single-sided, double-sided and multilayer pcb; pcba, rogers, fr4 material, and upto 32layers prototype build, mass production can build upto 22layers

Multilayer pcb Manufacturer & Supplier
Inquire Now
Company Name: SHENZHEN DUZIJ PCB CO., LTD - China(CN) -(Updated: Nov 01, 2006)
Manufacture of
single-sided pcb, double-sided pcb, multilayer pcb, printed circuit board, circuit board, pcba (pcb assembly), rigid pcb, fpc(flexible pcb), flex-rigid pcb, pcb board , aluminum pcb, high-precision pcb
Immersion White Tin
Conductive Carbon Ink/Paste
Board Thickness up to .250
.002 Core Processing
Mil-Spec certified in Tucson
IPC 6012 Class 1 Through 3
Redmond, WA facility was certified to ISO 9001:2000 on Dec. 3, 2003 for the sale, quick-turn production and delivery of printed circuit boards to customer specifications for a wide variety of commercial and military applications Printed Circuit Board (PCB) Manufacturer From China China Zhejiang ZAPON Electronic Technology CO.,Ltd founded in 1997, which is the manufacturer of multilayer PCB,double-sided PCB,single-sided PCB, PCB with buried and blind hole, and PCB Assembly. After 10 years of development, we have become one of the famous PCB manufacturer in China. We have more than 600 staffs at present, including engineers.We have passed ISO9001:2000 quality system certification and UL recognition. Learn More? We provide printed circuit board (pcb) products and services:
Multilayer PCB (Printed Circuit Board)
Double Sided PCB
Single Sided PCB
Aluminium PCB
ROHS Standard PCB
HAL Lead Free PCB
Immersion Gold PCB
PCB Assembly and Surface Mount Technology (SMT)
UL / ISO 9000 approved PCB
Volume PCB
Also we have provided an enquiry page link should you require a fast competitive PCB quotation.Multilayer PCB Design


Bit Mapper has been in the field of PCB Design for the last 18 years. We have migrated from designing Single Layer PCB's to Multilayer PCB's with Advanced features such as Signal Integrity Check...etc.

With Bit Mapper, It is correct Design First Time, Every Time.

Support of our clients has enabled us to upgrade our service, gain experience & insight such that

Our backbone is our in house system design experience of 20 years and our VLSI design and training experience of the last 7-years.
We are the only company who is an End to End Solution Provider, when it comes to design of Electronic Equipment. [Our PCB Design Solution forms a part of the COMPLETE DESIGN]
Our Experience of designing in-house and Clients products gives Value Addition to our clients as we can Foresee and THEREFORE Understand and THUS Appreciate our clients Inputs, Requirements and Constraints.
Service, Quality, CAD Compatibility, Experience and a Short turn around time are not mere keywords for us, we have been living them for the last 18 years.
We Support and Partner with Clients to work as an Offsite Design Team and provide them with a Dependable PCB Design Source.
We started with the CAD tools of the late 1980's and migrated to PCB analysis tools in 96-97.
We have processed Multi-Layer PCB's with mixed components on both the sides.
We have designed boards with packages such as BGA, FBGA, and CSP.
Use Auto router is limited to evaluate the correctness / efficiency of placement & density of routing. Manual routing & DFM is followed with post routing cleanup.
We insist that the we are a part of the clients design team.
We offer on line Service to our Distant Clients. [We live in a Wired World]


Cad Tools


From ZUKEN with
High speed routing.
Signal integrity with IBIS models.
EMI / EMC Analysis.
Reflection and Cross Talk Analysis.
Termination Advisor

Excelcam Design for manufacturability, Analysis of acid traps.
From WINTEK Corporation with
Auto routing and Auto placement.
Import and Export for different CAD tools



Back to Top
Highlights Of Our Service


High Speed, High Density PCB Design
BGA's and Fine Pitch-High Pin count devices
Mix Technology Analogue / Digital PCB Designs
Design for EMC - reduced EMI and noise susceptibility
Design Constraint Requirements (i.e. Differential Routing, Controlled Lengths/Delay, Crosstalk Control, etc.)
Handling Special nets
Ground Shielding on special nets.
Managing Skew problems - issues like pin ordering, branching, fixed length nets, Differential nets ...etc.
Clock nets - special care is provided to clock nets, which includes clock tree design with proper termination(s).
Adding Automatic Test points - as part of DFT ( as required by ATE's).
Design for Manufacturing
Selecting correct style of copper pouring on Power and Ground nets. To avoid bridging when soldered on wave soldering machines.
Design for Economy -
Designing Split Power Planes to reduce the number of overall layers.
User Constraints
Via and Net delays for high speed traces.
Net Frequency and Net Current for critical signals.
Impedance Control
Multilayer, Surface Mount and Mixed Technologies
Complete Signal Integrity (includes)
Measurements - viz.
Net lengths, Impedance(s), Rise / Fall time, Overshoot / Undershoot.
Analysis
Cross talk, Reflection including Termination Adviser.


Back to Top
Capabilities


Analog

BGA /FFBGA

Controlled Impedance

D/S / Through Hole / SMD


Air gap
Hanging traces
Mechanical fit
Cross Probing of Schematic and PCB's
DRC (Design Rule Checking)
Silk-screen overlap
Gerbers using ExcelCAM

Back to Top

Our Strength


Awareness and Appreciation of high speed issues like Signal Integrity, Control Impedance, Skew ..etc [ we are primarily a VLSI Design and Training Company].
We extend our experience of high speed Digital Design [ including multimillion gate FPGA's, PCI and DSP based solutions ] to PCB design.

Back to Top

Our Belief


We are a part of the clients design team, and his active involvement is the preferred way of completing the design successfully and in time.
Any tool is ONLY as good as the person handling it.
Technology is there to change, Skills are there to stay. Multilayer pcb exporters, suppliers, manufacturers, factories and Distributors related to multilayer pcb

Sign In | Join Free | Help Inquiry Basket

Member Area | Logout | Help Inquiry Basket


Home
Sell Offers
Buy Offers
Products
Companies
Member Area


1,872,011 Registered Users Latest Sell Offers | Add New Sell Offer | My Sell Offers | Free Offer Alert




How TradeKey.com can help suppliers
Watch Movie
Post your Products for FREE
Search Products Worldwide:

Home > Products > multilayer pcb
Products




Special Products
Select and Click or

Showing 6 of 80 records found Page 1 of 9

Contact Now



1-10 Layers PCB
1-10 Layers FR4 laminate with flexible demands available, min. line width/spacing 0.1/0.1mm. Min. via size: 0.2mm Surf...

| China


from TRULY ELECTRONICS CO.,LTD

[Related Categories: PCB & PCBA]
[Related Keywords: multilayer pcb, pcb board, layer multi pcb, multilayer pcbs]

Contact Now



PCB Multilayer Circuit Boards
PCB multilayer circuit boards *Layers:4-12 *Base material: FR-4 *Thickness: 0.5-3.0mm *Solder mask: green, black ,...

| China


from Shenzhen K-better Electrical Co., Ltd

[Related Keywords: pcb, multilayer, circuit]



Contact Now



4 Layer HAF Board
Fully Hong 4L 4 layer board Surface treatment: HAF lead free Base Copper thickness(Inner / outer layer):10Z/H0Z Boar...

China


from Fully Hong Electronics Company limited

[Related Keywords: pcb manufacturing, pcb company, pcb manufacturer]

Contact Now



Hard Disk PCB
PC 3000 pci v2.27 + data extractor v2.2 english ver; intel845gl M/B free; PC3000 isa v14.51: HRT HIE200: HIE4...

China


from HK HX TECHNOLOGY DEVELOPMENT CO LIMITED

Contact Now



Small Quantity PCB(Printed Circuit Board)
We are UL & ISO9001: 2000 certified manufactory of Printed Circuit Boards in Guangzhou, China. We focus on the quick...

China


from Wonder Electronic Technology LTD

[Related Keywords: printed circuit boards, circuit boards, electronic circuit boards]

Contact Now



PCB & PCB Assembly & OEM Service
Yichtech Electric Corporation Ltd is a professional manufacture PCB up to 12 Layers and FPC up to 8 layers of factory. ...

China


from Yichtech Electronic Corporation Ltd

[Related Keywords: flexible pcb, used pcb, circuit board]
92 products | News/Research
Taiwan
View more: Multilayer PCB | Multilayer PCB | Two-layered PCB
Rank:
Multilayer PCB
Multilayer PCB with Minimum Hole Diameter of 0.275mm
Lin Horn Technology Co Ltd
92 products | News/Research
Taiwan
View more: Multilayer PCB | Multilayer PCB | Two-layered PCB
Rank:
Multilayer PCB
Multilayer PCB with Minimum Line Width/Spacing of 0.1mm; Lamination Service
Far East Electronic Circuit Ltd.
101 products | News/Research
Hong Kong SAR
View more: Multilayer Lamination Service | Multilayer Lamination Service | Multilayer Lamination Service
Rank:
Multilayer PCB
Multilayer PCB with Thickness of 1.6mm; Lamination Service
Far East Electronic Circuit Ltd.
101 products | News/Research
Hong Kong SAR
View more: Multilayer Lamination Service | Multilayer Lamination Service | Multilayer Lamination Service
Rank:
Multilayer PCB
Multilayer PCB with Thickness of 1.6mm; Lamination Service
Far East Electronic Circuit Ltd.
101 products | News/Research
Hong Kong SAR
View more: Multilayer Lamination Service | Multilayer Lamination Service | Multilayer Lamination Service
Rank:
Multilayer PCB
Multilayer PCB with Thickness of 1.6mm; Lamination Service
Far East Electronic Circuit Ltd.
101 products | News/Research
Hong Kong SAR
View more: Multilayer Lamination Service | Multilayer Lamination Service | Multilayer Lamination Service
Rank:
Multilayer PCB
Multilayer PCB with Minimum Hole Size of 0.3mm; Lamination Service
Finenet Electronic Circuit Ltd
112 products | News/Research
Hong Kong SAR
View more: Multilayer PCB | Multilayer PCB | Multilayer Lamination Service
Rank:
Multilayer PCB
Multilayer PCB with Minimum Hole Size of 0.3mm; Lamination Service
Far East Electronic Circuit Ltd.
101 products | News/Research
Hong Kong SAR
View more: Multilayer Lamination Service | Multilayer Lamination Service | Multilayer Lamination Service
Rank:
Multilayer PCB
Multilayer PCB with Minimum Hole Size of 0.3mm; Lamination Service
Finenet Electronic Circuit Ltd
112 products | News/Research
Hong Kong SAR
View more: Multilayer PCB | Multilayer PCB | Multilayer Lamination Service
Rank:
Multilayer PCB
Multilayer PCB with Minimum Hole Size of 0.3mm; Lamination Service
Far East Electronic Circuit Ltd.
101 products | News/Research
Hong Kong SAR
View more: Multilayer Lamination Service | Multilayer Lamination Service | Multilayer Lamination Service
Rank:
Multilayer PCB
Multilayer PCB with LPI (Green) Solder Mask; Lamination Service
Far East Electronic Circuit Ltd.
101 products | News/Research
Hong Kong SAR
View more: Multilayer Lamination Service | Multilayer Lamination Service | Multilayer Lamination Service
Rank:
Multilayer PCB
Multilayer PCB with Thickness of 1.6mm; Lamination Service
Finenet Electronic Circuit Ltd
112 products | News/Research
Hong Kong SAR
View more: Multilayer PCB | Multilayer PCB | Multilayer Lamination Service
Rank:
Multilayer PCB
Multilayer PCB with LPI (Green) Solder Mask; Lamination Service
Far East Electronic Circuit Ltd.
101 products | News/Research
Hong Kong SAR
View more: Multilayer Lamination Service | Multilayer Lamination Service | Multilayer Lamination Service
Rank:
Multilayer PCB